Using SAM-BA¶

Sam-BA¶

http://www.linux4sam.org/twiki/bin/view/Linux4SAM/GettingStarted

• J4 must be opened (BMS=1) to boot from the on-chip Boot ROM
• remove DataFlash Jumper (J21)
• power up the board
• verify that the USB connection is established (ATMEL AT91xxxxx Test Board appears in taskbar notification area)
• plug DataFlash Jumper (J21) back in position 1-2

U-Boot¶

http://www.linux4sam.org/twiki/bin/view/Linux4SAM/U-Boot

• Open SAM-BA
• Script -> Enable DataFlash
• Script -> Send Boot File -> dataflash_at91sam9261ek.bin
• Adress 0x00008000 - u-boot-1.3.4-exp-at91sam9261ek-dataflash_c0.bin -> SendFile

WinCE¶

firstBoot.nb0 with the script -> Send Boot File
then Eboot.nb0 at addr 0x5000